KAΤΑΣΚΕΥΗ PLL FM Single chip stereo FM transmitter

Single chip stereo FM transmitter

Some data:
Stereo or mono operation.
Audio muting.
Power output 0.2mW = -7 dBm = 100dBµV @ 50ohm
87.5 - 108.0 MHz, in 100kHz steps.
Setting up frequency & stereo/mono:
Press SET button to enter setup mode.
- An arrow points to the frequency -
- Press UP or DOWN to alter frequency -
Press SET again.
- An arrow points to stereo or mono -
- Press UP for stereo or DOWN for mono -
Press SET again.....Ready
Press MUTE for temporary audio muting

ΚΑΤΑΣΚΕΥΗ ΕΝΙΣΧΥΤΗ FM 28 WATT ME TO TR 2SC1946

 ΚΑΤΑΣΚΕΥΗ ΕΝΙΣΧΥΤΗ FM 28 WATT ME TO TR  2SC1946

OI ΠΛΑΚΕΤΕΣ ΤΟΥ ΚΑΙ ΤΑ ΥΛΙΚΑ ΤΟΥ 

VOLTAGE 13.8V - 15V

The layout of the 2SC1946 28 Watts FM broadcast RF amplifier has been created with sPRINT Layout v3.0. You can get a Shareware copy at: http://www.abacom.de. The pcb outline is 100 x 50 mm (width x height).

RF Amplifier Parts List
All component values are drawn on the .comp and .silklayer bitmaps, with the following exception(s);
all four (4) coils (in the lowpass filter section) are: 3.5 turns, 8 mm DIA., 1.2 mm CuL closewound i.e. no wirespacing.

CuL = magnetwire, enameled copper wire, insulated (rigid) copper wire e.t.c..
2 mm equals approx. to #12 A.W.G
1 mm equals approx. to #18 A.W.G
1.2 mm equals approx. to #17 A.W.G
0.8 mm equals approx. to #20 A.W.G
0.3 mm equals approx. to #28 A.W.G.)

All diameters are measured from the inside of the coils, i.e. ‘internal’ diameter.
Make sure to mount the rf-transistor on a appropriate heatsink and use some thermal heatsink compound between the flange of the transistor and heatsink! (Thermal resistance heatsink at least 6°C/W.)